AL-KO Spare Wheel Holder Mounting Kit 294284

AL-KO Spare Wheel Holder Mounting Kit 294284

Mounting kit suitable for mounting the AL-KO spare wheel holders on a NON AL-KO chassis.

Kit is necessary for a chassis without holes in the longitudinal beams for the spare wheel holders (a chassis other than AL-KO).

Set consisting of 2 mounting plates, 4 bolts, and 4 nuts.

Installation tip:
The distance from the support plates to the axle should be approximately 700 mm. Two holes Ø12.5 mm are drilled at a distance of 275 mm in both chassis parts. The holes should be made in the middle bracket (neutral zone). The two mounting plates (24) are attached with two hexagon bolts (25) M12x25 and hexagon nuts (26) M12. The locking bolt (9) is inserted into the right retaining plate with the hexagon nut (18). Locking bolt (9) and hexagon nut (18) are supplied with the spare wheel holder.

AL-KO Article Number: 294284