Lighting test box 7 & 13-pin 12V with automatic function

7 & 13-Pin test unit for trailer lighting with auto-loop function

Lighting test box 12V suitable for 7 & 13-pin Jaeger plugs.
Includes DC charger

- What sets this trailer lighting tester apart is that it has an automatic function, saving unnecessary back and forth walking during testing.
- Set the switch to automatic and the test box will cycle through all functions and let them burn for several seconds.
- If manual operation is desired for repairs etc., turn the main switch to ON, then the individual functions can be activated separately.
- Equipped with short-circuit protection.
- In an impact-resistant ABS case with a practical handle and is easy to use for daily use in the workshop.
- In case of short circuit or overload, the LED for the main switch will go out.
- For each function, there is a switch/led switch and a main switch.
- Pressing "BAT TEST" will charge the battery and the battery LEDs will indicate the status of the battery for use.
- Equipped with a battery indicator indicating:
100% charged = 13.5 V
50% charged = 12.0 V
25% charged = 11.0 V Must be charged.
- The trailer lighting tester is protected against incorrect polarization, overload with an automatic 8 Amp fuse.
- Circuit breakers are guaranteed for a load of 20 Amp.

Battery life (fully charged): 3 hours (with 1 output on)
Voltage: 12.6 V
Max total power: 8 Amp
Brand: G.S.E

Length: 250 mm
Width: 90 mm
Height: 120 mm

G.S.E. / RACO Article number: 12156